跳转至

v0.7 to v0.8

Upgrading from v0.7 to v0.8 is possible using the regular upgrade guide.

All resources should continue to operate as before.

As part of v0.8, a new format for configure ACME Certificate resources has been introduced. Notably, challenge solver configuration has moved from the Certificate resource (under certificate.spec.acme) and now resides on your configure Issuer resource, under issuer.spec.acme.solvers.

This allows Certificate resources to be portable between different Issuer types.

Both the old and the new format of configuration are supported in the v0.8 release, so it is possible to incrementally upgrade your resources if you have a large, multi-team deployment of cert-manager that makes it complex to upgrade all manifests at once in place.

After upgrading, it is strongly recommended that you update your ACME Issuer and Certificate resources to the new format.

We will be removing support for the old format ahead of the 1.0 release.

The documentation has been updated to reflect configuring using the new format, and as such, exhaustive information can be found in the document.

Performing an incremental switch to the new format

The following guide assumes you have 2 'solver types' currently in use across your cert-manager deployment - one for DNS01 and another for HTTP01 using an ingress class of nginx. The nginx based HTTP01 solver will be configured as the default solver type for Certificate resources that reference our issuer.

You can adjust the instructions below to fit your own configuration, either with more or less solvers as appropriate.

First, we will modify our ACME Issuer to add the new HTTP01 and DNS01 solvers. This operation will not effect any existing Certificates that already explicitly set a certificate.spec.acme field:

apiVersion: certmanager.k8s.io/v1alpha2
kind: ClusterIssuer
metadata:
  name: letsencrypt-staging
spec:
  acme:
    email: user@example.com
    server: https://acme-staging-v02.api.letsencrypt.org/directory
    privateKeySecretRef:
      name: example-issuer-account-key

    # The HTTP01 and DNS01 fields are now **deprecated**.
    # We leave them in place here so that any Certificates that still
    # specify a `certificate.spec.acme` stanza will continue to operate
    # correctly.
    # cert-manager will decide which configuration to use based on whether
    # the Certificate contains a `certificate.spec.acme` stanza.
    http01: {}
    dns01:
      providers:
      - name: cloudflare
        cloudflare:
          email: my-cloudflare-acc@example.com
          apiKeySecretRef:
            name: cloudflare-api-key-secret
            key: api-key

    # Configure the challenge solvers.
    solvers:
    # An empty selector will 'match' all Certificate resources that
    # reference this Issuer.
    - selector: {}
      http01:
        ingress:
          class: nginx
    - selector:
        # Any Certificate resources, or Ingress resources that use
        # ingress-shim and match the below label selector will use this
        # configured solver type instead of the default nginx based HTTP01
        # solver above.
        # You can continue to add new solver types if needed.
        # The most specific 'match' will be used.
        matchLabels:
          use-cloudflare-solver: "true"
      dns01:
        # Adjust the configuration below according to your environment.
        # You can view more example configurations for different DNS01
        # providers in the documentation: https://cert-manager.io/docs/tutorials/acme/dns-validation/
        cloudflare:
          email: my-cloudflare-acc@example.com
          apiKeySecretRef:
            name: cloudflare-api-key-secret
            key: api-key

By retaining both the old and the new configuration format on the Issuer resource, we can begin the process of incrementally upgrading our Certificate resources.

Any Certificate resources that you have manually created (i.e. not managed by ingress-shim) must then be updated to remove the certificate.spec.acme stanza.

Given the above configuration, certificates will use the HTTP01 solver with the nginx ingress class in order to solve ACME challenges.

If a particular certificate requires a wildcard, or you simply want to use DNS01 for that certificate instead of HTTP01, you can add the use-cloudflare-solver: "true" label to your Certificate resources and the appropriate ACME challenge solver will be used.

Upgrading ingress-shim managed certificates to the new format

When using ingress-shim, cert-manager itself will create and manage your Certificate resource for you.

In order to support both the old and the new format simultaneously, ingress-shim will continue to set the certificate.spec.acme field on Certificate resources it manages.

In order to force ingress-shim to also use the new format, you must remove the old format configuration from your Issuer resources (i.e. issuer.spec.acme.http01 and issuer.spec.acme.dns01).

When ingress-shim detects that these fields are not specified, it will clear/not set the certificate.spec.acme field.

If you are managing a certificate using ingress-shim that requires an alternative solver type (other than the default solver configured on the issuer which in this instance is the HTTP01 nginx solver), you can add labels to the Ingress resource which will be automatically copied across to the Certificate resource:

apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: my-test-ingress
  labels:
    use-cloudflare-solver: "true"

Confirming all Certificate resources are upgraded

In order to check if any of your Certificate resources still have the old configuration format, you can run the following command:

$ kubectl get certificate --all-namespaces \
    -o custom-columns="NAMESPACE:.metadata.namespace,NAME:.metadata.name,OWNER:.metadata.ownerReferences[0].kind,OLD FORMAT:.spec.acme"
NAMESPACE   NAME    OWNER    OLD FORMAT
default     test    <none>   <none>
default     test2   Ingress  map[config:[map[domains:[abc.com] http01:map[ingressClass:nginx]]]]

In the above example, we can see there are two Certificate resources.

The test resource has been updated to no longer include the certificate.spec.acme field.

The test2 resource still specifies the old configuration format, however it also has an OwnerReference linking it to an Ingress resource. This is because the test2 Certificate resource is managed by ingress-shim.

As mentioned in the previous section, ingress-shim managed certificates will only switch to the new format once the old format configuration on the Issuer resource has been removed. This means we need to continue to the next section in order to remove the old format configuration altogether from Issuer resource in order for ingress-shim to automatically migrate the test2 Certificate resource.

Removing old configuration altogether

Once we've verified that all non-ingress-shim managed Certificate resources have been updated to not specify the certificate.spec.acme stanza using the command above, we can proceed to remove the issuer.spec.acme.http01 and issuer.spec.acme.dns01 stanzas from our Issuer resources. Once completed, the Issuer resource from the previous section should look like the following:

apiVersion: certmanager.k8s.io/v1alpha2
kind: ClusterIssuer
metadata:
  name: letsencrypt-staging
spec:
  acme:
    email: user@example.com
    server: https://acme-staging-v02.api.letsencrypt.org/directory
    privateKeySecretRef:
      name: example-issuer-account-key

    # Configure the challenge solvers.
    solvers:
    # An empty selector will 'match' all Certificate resources that
    # reference this Issuer.
    - selector: {}
      http01:
        ingress:
          class: nginx
    - selector:
        # Any Certificate resources, or Ingress resources that use
        # ingress-shim and match the below label selector will use this
        # configured solver type instead of the default nginx based HTTP01
        # solver above.
        # You can continue to add new solver types if needed.
        # The most specific 'match' will be used.
        matchLabels:
          use-cloudflare-solver: "true"
      dns01:
        # Adjust the configuration below according to your environment.
        # You can view more example configurations for different DNS01
        # providers in the documentation: https://cert-manager.io/docs/tutorials/acme/dns-validation/
        cloudflare:
          email: my-cloudflare-acc@example.com
          apiKeySecretRef:
            name: cloudflare-api-key-secret
            key: api-key

After applying the above Issuer resource, you should re-run the command from the last section to verify that the remaining ingress-shim managed Certificate resources have also been updated to the new format:

$ kubectl get certificate --all-namespaces \
    -o custom-columns="NAMESPACE:.metadata.namespace,NAME:.metadata.name,OWNER:.metadata.ownerReferences[0].kind,OLD FORMAT:.spec.acme"
NAMESPACE   NAME    OWNER    OLD FORMAT
default     test    <none>   <none>
default     test2   Ingress  <none>

Manually triggering a Certificate to be issued to validate the full configuration

To be certain that you've correctly configured your new Issuer/Certificate resources, it is advised you attempt to issue a new Certificate after removing the old configuration format.

To do so, you can either:

  • update the secretName field of an existing Certificate resource
  • add an additional dnsName to one of your existing Certificate resources
  • create a new Certificate resource

You should ensure that your Certificates are still be issued correctly to avoid any potential issues at renewal time.

Special notes for ingress-gce users

Users of the ingress-gce ingress controller may find that their experience configuring cert-manager to solve challenges using HTTP01 validation is slightly more painful using the new format, as it requires the ingressName field to be specified as a distinct solver on the Issuer resource (as opposed to in the past where the ingressName could be specified as a field on the Certificate resource).

This is a known issue, and a workaround is scheduled to be completed for v0.9.

In the meantime, ingress-gce users can either choose to manually create a new solver entry per Ingress resource they want to use to solve challenges, or otherwise continue to use the old format until a suitable alternative appears in v0.9.